Full Arch Masters Courses

At Full Arch Masters we provide a variety of courses designed to enhance your dental implant skill set. Take a look at the upcoming dates below for our Flagship Courses, Introductory Courses, and Specialized Courses and sign up you and your team today while there are still spots available.

DOCTOR REQUIREMENTS

LAB TECHNICIAN REQUIREMENTS

FLAGSHIP COURSES (Fresno, California)

  • July 11-14, 2022
  • October 10-13, 2022
  • November 14-17, 2022

OTHER COURSES

  • TBD (Advanced Live Surgical with Dr. Bernardo de Sousa)

  • TBD (Design & Finish Course)

What You’ll Learn at Full Arch Masters

Hands-On Experience

Access to Program Amenities

Networking with Dentists

Career Advancement

Access to Technology

The Full Masters Jacket

Flagship Course

The flagship FAM course is the backbone of our education platform. This course is a 4-day bootcamp for Doctor, in house lab technician, and team members. All steps of the FAM method are covered in multiple settings – clinical with live patient experiences, lab with expert technician educators, and lecture with a top-notch presentation from various perspectives. Participants will be “put into action” on many interactive and educational modules designed to teach the delegation of duties for maximum success.

Course Fee: $20,000

Lab Design & Finish Course

Our expert level lab course is designed for Doctors, lab technicians and assistants who want to learn the highly skilled design and esthetic finishing procedures associated with full arch implant cases.  The first 2 days of the course focuses on the pre-op, immediate load with digital printed conversion, and final design for zirconia based restoration.  The last 2 days are an opportunity to work with pre-sintered and post-sintered zirconia, utilizing green-stage contouring and MiYO ceramic layering to achieve an outstanding esthetic outcome. 

Design & Finish Course

Our expert level lab course is designed for Doctors, lab technicians and assistants who want to learn the highly skilled design and esthetic finishing procedures associated with full arch implant cases.  The first 2 days of the course focuses on the pre-op, immediate load with digital printed conversion, and final design for zirconia based restoration.  The last 2 days are an opportunity to work with pre-sintered and post-sintered zirconia, utilizing green-stage contouring and MiYO ceramic layering to achieve an outstanding esthetic outcome. 

Advanced Surgical Course

This surgery-only course is a deep dive into the advanced surgical techniques that many FAM alumi use daily to solve the challenging cases in full arch implant surgery.  Day 1 is a series of in-depth lectures, hands-on modules, and cadaver dissection.  The subsequent days are a live opportunity to perform your own surgeries with an expert mentor guiding you.  Placement of pterygoid implants, custom subperiosteal implants, trans-sinus implants, zygoma implants, and palatal approach implants are covered in-depth, with opportunities to place or observe these procedures live following the lectures.

Tuition Course Fee: $19,990
Doctor Observer Fee: $4,990

Advanced Surgical Course

This surgery-only course is a deep dive into the advanced surgical techniques that many FAM alumi use daily to solve the challenging cases in full arch implant surgery.  Day 1 is a series of in-depth lectures, hands-on modules, and cadaver dissection.  The subsequent days are a live opportunity to perform your own surgeries with an expert mentor guiding you.  Placement of pterygoid implants, custom subperiosteal implants, trans-sinus implants, zygoma implants, and palatal approach implants are covered in-depth, with opportunities to place or observe these procedures live following the lectures.

Tuition Course Fee: $19,990
Doctor Observer Fee: $4,990

Full Arch Masters Team

The power of FAM is in the team approach. We teach the power of teamwork and delegation of duties within
the workflow. Learn how to cross-train your team from a variety of well-trained experts in their respective fields.

Full-Arch-Masters-Course_Dental-Implants-Team_Ryan-Dunlop

Dr. Ryan Dunlop, Founder

Dr. Dunlop founded the Full Arch Masters network and training course in 2018. Since then, he has helped hundreds of doctors achieve their goal of integrating lab and a fully digital workflow for full arch dentistry.

He runs a comprehensive IV sedation practice and full-service dental lab in Fresno Ca, where he lives with his wife and three children. His goal is to develop and maintain the largest full arch implant community in the world with a simply combined mentality, high-quality care, collaboration not competition, and the most advanced technology on the planet.

full-arch-masters_dental-implants_digital-technology_dental-course_amy-moench

Amy Moench, RDA, RDAEF2

Full Arch Masters Coordinator, Implant Coordinator

Amy has worked alongside Dr. Dunlop since 2013 at the start of her dental career. Amy takes care of all things implant in our office, keeping us stocked up for all our implant needs as well as working chairside with Dr. Dunlop.  She coordinates the Full Arch Masters training course by guiding and helping doctors every step of the way. Amy instructs both doctors and assistants in obtaining accurate records for the digital workflow.

She demonstrates intraoral scanning, photogrammetry, and ideal photography for each case. She is also the main point of contact for incoming FAM teams and for the doctors and team members after the course. 

full-arch-masters_dental-implants_digital-technology_dental-course_nicholas-do

Nicholas Do

Esthetics Director

Nicholas has 21 years of experience as a ceramist technician. He is a classically trained artist that combined the science of dental prosthetics with an artistic interpretation of natural dentition to recreate organic-looking restorations.

Nicholas focuses on dental ceramics and all fixed restorations. He teaches final finishing restorations in zirconia, hybrid arches, prototype arches, using porcelain and composite. Nicholas provides advanced coaching on natural esthetic and functionality. 

Juan Estrada

Network/Technology Specialist

Juan is a Digital Workflow Engineer at SurfCT.com – the leading dental IT company in the world where Everything Is Connected™️.  Mr. Estrada specializes in, constructing premium customized technology systems for dentists all over the globe. Juan is notably experienced in the area of complete digital workflow and practice automation including AI, dental records acquisition, cone beam imaging and intra-oral scanning, and how all these technologies connect together for

in-office manufacturing with 3D printing and milling.  A complete automated experience for both patients and doctors.  Juan has a great passion for improving office workflow and practice efficiency through technology. Having worked at some of most exclusive dental practices in New York City for over a decade, this unique hands on experience gave Mr. Estrada a deep understanding over the inner workings of dental practices, and what dentists need and want for their practices to grow.  This hands-on knowledge coupled with his studies, university degrees and certifications in Industrial Electronics and Networking allowed him to be at the forefront of dental technology surrounded by a strong culture that Everything Is Connected™️ with the SurfCT team. When Juan isn’t designing or working on tailored systems to help doctors grow, he enjoys spending quality time with his family, reading, writing, snowboarding, and traveling.

Kamil J. Zborowski

CAD/CAM Specialist

Kamil has extensive education and experience in Digital Dentistry. Dental Technology is a fabric of life for him as he is a third-generation Dental Technologist. He has been the owner of WTI Dental Concepts, a consulting firm helping dental clinics and laboratories build custom CAD/CAM solutions as well as navigate through the web of Digital Dentistry. To date, he has consulted on five continents around the world in a wide array of applications.


Mr. Zborowski’s passion to spread new technologies has driven him to become a Certified Trainer for companies like Exocad®, Sum3D®, and PiC Dental®. His frequent lectures are aimed at Understanding Digital Dentistry from a clinic and laboratory point of view, stressing the need for a team approach, and focusing on CAD/CAM Solutions for Dental Implants.